An asbestos report for commercial property is only useful when it correctly identifies the building, covers the relevant rooms and work areas, and makes any uncertainties clear. A landlord might hold a 70-page PDF and still lack the right information. Contractors drilling into a riser or removing a ceiling may need more.
Need a survey for your premises? See our commercial asbestos survey service in London for offices, shops, warehouses and other non-domestic buildings.
This London-focused checklist explains how to review a commercial asbestos survey report before maintenance, a new tenancy or refurbishment. This guide helps you check a report and arrange follow-up. It does not replace a competent surveyor or the dutyholder’s asbestos management arrangements.
Start by checking why the survey was commissioned
The purpose determines the correct type of survey. A management survey is normally used to support asbestos management during ordinary occupation and foreseeable maintenance. A refurbishment or demolition survey is designed around the building fabric that will be disturbed by more intrusive works.
The Health and Safety Executive’s survey guidance makes this distinction explicit. Do not treat an existing management survey as automatic clearance for a shop fit-out, major cabling project or strip-out. You may need a refurbishment survey for the affected areas, even if the building already has an asbestos register.
The ten checks to make before work starts
1. Check the property identity and the survey dates
Confirm the site address, specific building, floor, unit and survey date. In multi-let offices, shop parades and estates, a report for Unit A may not cover Unit B. It may also miss shared service routes. Compare the survey date with subsequent alterations, damage or removal work.
2. Check whether the survey type matches the planned job
Identify whether the report is a management survey, a refurbishment survey, a demolition survey or an explicitly combined scope. If the proposed work has changed since commissioning, ask the surveyor to assess whether additional inspection is needed. A change of owner does not make a reliable report invalid. But a change in planned work may mean the scope is no longer enough.
3. Read the scope and agreed exclusions
Find the section listing inspected areas and those outside the agreed scope. Check that service cupboards, ceiling voids, plant rooms, risers, roof spaces, basements and outside areas were considered where relevant. A list of exclusions is not simply administrative text—it limits where you can rely on the survey.
4. Identify every ‘no access’ or presumed-asbestos entry
A locked plant room, boarded ceiling void or inaccessible duct can leave significant uncertainty. HSE guidance says areas not accessed should be presumed to contain asbestos and managed accordingly until inspected. Ensure these locations appear clearly in the report and are not overlooked when contractors plan access. See our guide to ‘no access’ survey limitations.
5. Compare marked-up plans with the actual building
Can somebody unfamiliar with the property find each material on the drawings? Plans should identify rooms and show known or presumed asbestos-containing materials (ACMs) clearly. Ambiguous labels such as ‘first-floor ceiling’ may not be enough for a building with many identical rooms. Ask for clarification rather than guessing a location.
6. Review the ACM schedule and material information
Look for the location, material type and rough extent. Check whether asbestos was confirmed by lab analysis, strongly presumed or simply presumed. For management surveys, relevant material-condition and material-assessment information should support decisions about managing the material. A material assessment is not, by itself, the whole priority or exposure-risk assessment.
7. Match sample results to locations and materials
Laboratory results should be traceable to sample identifiers and the corresponding room, element or material. A negative sample from one area does not establish that all similar-looking finishes elsewhere are asbestos-free. Conversely, where a suspect material is presumed to contain asbestos without sampling, that distinction should be clearly stated.
8. Check material condition and recommended actions
For a management survey, look at recorded damage, deterioration, surface treatment and advice on inspection or remedial priorities. Sound ACMs do not always require removal. The correct decision depends on their condition, likelihood of disturbance and planned activity. The dutyholder still needs a risk-based management plan.
9. Compare survey findings with the contractor’s exact work area
Before starting, review the contractor’s method, drawings and access route against the findings. For example, an electrician may enter an uninspected riser even when the principal work area was surveyed. If existing information is insufficient for the work, obtain appropriate further investigation before disturbing suspect materials.
10. Confirm handover, responsibilities and next actions
Find out who keeps the register and who shares it with contractors. Also check who arranges checks or repairs, and how new findings are recorded. Under regulation 4 of the Control of Asbestos Regulations 2012, non-domestic premises and shared common parts need proper asbestos management. The detailed dutyholder arrangements depend on control of maintenance and repair.
Quick comparison: report sections and common problems
| Report item | Question to ask | Why it matters |
|---|---|---|
| Survey type and purpose | Is this management, refurbishment or demolition, and does it match the job? | The wrong survey type can leave concealed ACMs outside the investigation. |
| Scope and exclusions | Were the necessary buildings, floors, rooms and voids inspected? | Uninspected areas need special treatment and may require follow-up. |
| Drawings and ACM schedule | Can a contractor locate each known or presumed material? | Poorly located entries increase accidental-disturbance risk. |
| Sampling and analysis | Do results match the listed materials and exact sample points? | A negative finding does not apply to every untested location. |
| Material assessment and actions | Are condition and potential management actions clear? | The dutyholder needs information to assess exposure risk and prioritise controls. |
| Handover and updates | Who holds the register and who informs contractors? | A static PDF alone does not fulfil effective ongoing management. |
What information must a commercial landlord give contractors?
HSE guidance is clear for premises under the duty to manage. Anyone who could disturb the building fabric must be given the asbestos information and management arrangements. That includes contractors undertaking repairs, fitting out, electrical work or service installations. HSE recommends sharing information early, potentially when asking for a quotation.
This should cover asbestos location and condition, the register and plans, safe work procedures and how site liaison will work. Merely emailing an old report without explaining its limitations may leave the contractor with unanswered questions.
For a practical information-handover guide, see what contractors should receive before work starts.
What if the report says ‘no asbestos detected’?
Read the finding in context. A report may show no asbestos in certain samples or accessible materials. Other areas may have been left out or could not be inspected. Do not read the report as a guarantee for the whole building. It only supports what its scope and evidence actually cover.
If work will enter uninspected areas, arrange appropriate assessment rather than relying on reassuring wording elsewhere in the document. Our negative asbestos test result guide explains this distinction.
Does a commercial asbestos survey report expire?
There is no universal fixed expiry date for every asbestos survey. Whether a report is still relevant depends on the quality and scope of the original survey. It also depends on changes to the building and the condition of known or presumed ACMs. HSE expects the management plan to be reviewed every 12 months, or sooner if needed. This does not mean buying a new whole-building survey every year.
See our outdated asbestos register checklist for deciding whether the information needs supplementary inspection, reinspection or updating.
A practical commercial report handover checklist
- Confirm the survey covers the correct commercial property, building and units.
- Match the survey type to the work about to be undertaken.
- Mark every ‘no access’, exclusion and presumed ACM on the contractor’s work plan.
- Check the plans, ACM schedule and sample references correspond to the premises.
- Review material condition and relevant management or remedial recommendations.
- Arrange a competent follow-up survey where hidden or affected materials remain unassessed.
- Share current asbestos information and site controls before contractors start work.
- Update the asbestos register and management plan when the building or findings change.
Where to see a sample asbestos survey report
Want to see the format before you book? Look at our anonymised sample asbestos management survey report. It illustrates how a scope, exclusions and sampling information can appear in a real report. For technical reporting standards and survey planning, consult HSE HSG264: Asbestos – The survey guide.
FAQs for London commercial property managers
Is a management survey sufficient before a shop or office refurbishment?
Not automatically. A management survey is intended primarily for normal occupation and foreseeable maintenance. Intrusive alterations to building fabric may need a targeted refurbishment survey to investigate the affected locations before work begins.
Who is responsible for updating the asbestos register?
The legal dutyholder is determined by responsibility for maintenance and repair, including relevant contractual arrangements. The register and associated management arrangements should be updated when materials, condition or building circumstances change.
Should a property buyer order another survey if the seller has one?
Not solely because ownership is changing. Review whether the report is competent, reliable and appropriately scoped for the intended use and works. Significant exclusions, alterations or proposed refurbishment may justify further assessment.
Can contractors start work while a void is listed as inaccessible?
Work that could disturb suspect materials in an uninspected void should not proceed on the assumption it is asbestos-free. The dutyholder and contractor need appropriate information, assessment and controls; further intrusive surveying may be required.
Request the right London commercial asbestos survey
Do you manage an office, shop, warehouse, commercial unit or shared building? If you are unsure whether your report covers your next project, we can help scope the right survey. Send us the property location, existing report details, any excluded areas and the precise work planned.
Looking for a surveyor in the capital? Our asbestos survey London page explains scope, pricing from £250 and how to book.
Request a commercial asbestos survey quotation. We offer fast London site visits, subject to availability. Pricing is clear, and digital reports are issued within 24–48 hours of the visit.
When is an asbestos report required for commercial property?
Do you own or manage non-domestic premises? Then the duty to manage asbestos applies. You need to know if asbestos is present, where it is and what condition it is in. For buildings built before 2000 this is usually done with an asbestos management survey and register. Before refurbishment or demolition work, a refurbishment and demolition survey of the areas affected is needed. Reports are also commonly requested when buying, leasing or ending a commercial lease. Get a commercial asbestos survey quote.