Removing an old fireplace or altering a chimney breast can look like a straightforward building job, but it may disturb materials that were added around the fire opening, hearth, wall or ceiling during earlier refurbishment.

In a London property built or refurbished before 2000, asbestos should be considered where intrusive work may affect suspect materials. HSE’s residential asbestos guidance specifically identifies asbestos insulating board (AIB) as a material that may be found behind a fire. That does not mean the brick or masonry chimney breast itself contains asbestos; the concern is usually with added boards, coatings, panels, insulation or other materials around the fireplace and adjoining building fabric.
Where asbestos may be found around an old fireplace
Potential asbestos-containing materials around a fireplace or chimney area can include:
- AIB behind the fire: HSE’s residential building diagram lists AIB behind a fire as a possible asbestos location.
- Heat-resistant boards or panels: older fire surrounds, backing panels or adjacent linings may contain asbestos.
- Textured wall or ceiling coatings: older decorative coatings can contain asbestos and may be disturbed when finishes are stripped or chased.
- Vinyl floor tiles or adhesive: hearth alterations or floor preparation can disturb older asbestos-containing flooring products.
- Pipe insulation or heating components: fireplace work carried out alongside heating alterations can expose older lagging or asbestos-containing panels.
- Concealed materials: previous refurbishments may have covered older boards or panels with plasterboard, tiles or later finishes.
HSE’s Asbestos essentials introduction shows common asbestos locations in residential buildings, while its Asbestos: The survey guide (HSG264) explains how survey scope should reflect the work being planned.
Does every fireplace removal need an asbestos survey?
No. The appropriate level of investigation depends on the age of the property, what materials are present and how intrusive the work will be.
Removing a modern freestanding appliance without disturbing older building fabric is different from stripping out an original fireplace, removing backing boards, opening a chimney breast, chasing walls or ceilings, or carrying out structural alterations.
For intrusive work in a pre-2000 property, existing asbestos information should be checked before contractors disturb suspect materials. If the available information does not cover the exact work area, targeted sampling or a refurbishment survey may be appropriate.
What about chimney breast removal?
A traditional brick or masonry chimney breast is not itself an asbestos-containing material. However, removing or altering it can affect nearby materials that were installed for fire protection, decoration, insulation or later building services.
For example, a project may disturb boards behind the fire opening, textured coatings on adjoining walls or ceilings, old floor finishes around the hearth, service boxing, or materials within voids exposed during demolition.
The survey therefore needs to follow the actual work area rather than simply treating the fireplace as a single item.
Management survey or refurbishment survey?
A management survey is intended mainly to support normal occupation and routine maintenance. It may not inspect concealed areas behind fixed finishes or within parts of the building that will only be opened during refurbishment.
HSG264 distinguishes refurbishment surveys from management surveys because refurbishment work can disturb the building fabric. A refurbishment survey should be sufficiently intrusive for the specific work area and should be completed before the refurbishment starts.
For a fireplace or chimney-breast project, the scope might include the fire opening, backing boards, adjoining wall finishes, ceiling junctions, hearth area and any service routes that the contractor plans to disturb.
Owner-occupied homes, landlords and contractors
For an owner-occupied private home, the homeowner is not automatically the asbestos dutyholder under the duty-to-manage provisions that apply to non-domestic premises. However, contractors and employers still have legal responsibilities to assess asbestos risk and avoid exposing workers and occupants when their work could disturb asbestos-containing materials.
Landlords, freeholders and managing agents can have additional responsibilities where they control maintenance or repair of common parts or non-domestic areas.
The practical point is the same: before intrusive work begins, the people carrying out the work should have asbestos information that is suitable for the task.
Fireplace removal asbestos checklist
| Part of the project | What to check |
|---|---|
| Fire opening and backing | Look for old boards or panels, especially heat-resistant materials behind the fire. |
| Wall finishes | Check older boards, textured coatings and concealed layers that may be cut or removed. |
| Ceiling junction | Consider textured coatings, ceiling boards and materials disturbed by structural work. |
| Hearth and flooring | Check old floor tiles, backing and adhesive before lifting or grinding. |
| Heating or pipework | Review older insulation, lagging or panels if services are being changed. |
| Chimney-breast alteration | Include adjoining wall, floor and ceiling areas in the survey scope where demolition will expose them. |
What should you tell the asbestos surveyor?
Provide a clear description of the planned work. Useful information includes:
- whether the fire surround and backing materials will be removed;
- whether the chimney breast will be opened, reduced or removed;
- whether ceilings or adjoining walls will be chased or demolished;
- whether the hearth and surrounding floor finishes will be lifted;
- whether heating, pipework or electrical services will also be altered;
- any previous asbestos reports, sampling results or removal records.
This helps the surveyor define a targeted scope instead of relying on a generic visual inspection.
What if suspected asbestos is found after work starts?
If a material that may contain asbestos is uncovered unexpectedly, work in the affected area should stop and the material should be left undisturbed until it has been assessed.
The next step depends on the material, its condition and the work required. Some lower-risk asbestos work can be undertaken by appropriately trained workers using suitable controls, while higher-risk work requires an HSE-licensed contractor.
Finding asbestos does not automatically mean everything around the fireplace must be removed. Materials that can safely remain in place and are outside the refurbishment area may sometimes be managed without removal.
Need an asbestos survey before fireplace removal in London?
If you are planning fireplace removal, chimney-breast alteration or related refurbishment in a London property, we can help define an appropriate asbestos survey or sampling scope around the proposed work.
For wider projects, see our guide to asbestos surveys before renovating a London home. You can also review our asbestos survey scope examples to see how intrusive refurbishment areas can be defined.
Request an asbestos survey quote and include the property type, approximate age and a short description of the fireplace or chimney work.
This article provides general information and does not replace a property-specific asbestos assessment or professional advice.
Next step: see our asbestos survey services in London, including management surveys and refurbishment and demolition surveys. Check the survey cost guide or request a quote for your property.
Related guide: Planning building work? Read about our refurbishment asbestos survey in London.
Related guide: Asbestos in loft pipes and textured ceilings